Texture UV for Autoprint/Anilox/Flexo Coater

Next > >

Send Inquiry

Product Code : Flexo-UV-coating

Brand Name : Jainco

Product Description

Our texture UV grades give good finish even with the low GSM and high speed coating achieved by Autoprint 120-300LPI Anilox Roller. The following are our range of single pass texture finishes which differ based on texture, feel and viscosity.

Name	Viscosity	Finish
UV-127TX	Medium	Fine Texture
UV-246TX	High	Leather
UV-237TX	Very High	Leather
UV-375K	Low	Satin Finish

Technical Specifications

UV Grade	Finish	Viscosity(sec) at 30 deg C	Application By	Additional Notes
UV Coat-3000G	High Gloss	38-42	Roller coater, flexo, offset dampner, and varnishing machine	Economy grade
UV Coat-3030G	High Gloss	30-34	Roller coater, flexo, offset dampner, and varnishing machine	Economy grade
UV Coat-1200G	High Gloss	120-130	Roller coater, flexo, offset dampner/ink duct, and varnishing machine	High viscosity
UV Coat-1800G	High Gloss	High	Offset ink duct	High viscosity
UV Coat-1000G	High Gloss	38-42	Roller coater, flexo, offset dampner, and varnishing machine	Gluable, Odorless
UV Coat-1500SSI	High Gloss	Medium	Roller coater	Base for scratch ink
UV Coat-6000GG	High Gloss	30-34	Roller coater, flexo, offset dampner, and varnishing machine	Gluable (777 and Aerobond 58), hot foil stampable, over-printable
UV Coat-246TX	Texture	165-175	Roller coater, flexo, offset dampner, and varnishing machine
UV Coat-127TX	Texture	95-105	Roller coater, flexo, offset dampner, and varnishing machine
UV Coat-3020G	High Gloss	22-24	Roller coater	Suitable for thin-sheet
UV Coat-Matt	Matt	38-42	Roller coater, flexo, offset dampner, and varnishing machine